CP70-16-M/C-148

3D View

Standards


The camera from the CamPerform-CP series  integrates the LUX160 sensor offering a very high resolution of 16 MPixel. Up to 148 frames/sec at full Resolution can be captured. Reducing the readout area in vertical or also in horizontal direction allows to strongly increase frame rate. This flexibility makes the camera an ideal component for a variety of applications like 2D- and 3D-metrology or motion analysis.
The signal processing inside the camera is optimized for low readout noise. Signal gain and offset can be adjusted. A hot-pixel-correction further improves image quality. The sensor, operating in global shutter mode, is available in a monochrome and color version.


More product information

Performance

Resolution (H x V)Frames / second

4,672 x 3,416

148 frames/sec

4,672 x 512

988 frames/sec

4,672 x 256

1.968 frames/sec

4,672 x 128

3.907 frames/sec

4,672 x 32

14.939 frames/sec

4,080 x 3,072

187 frames/sec

4,080 x 2,048

281 frames/sec

2,048 x 1,024

1.012 frames/sec

2,048 x 32

30.557 frames/sec

1,024 x 512

2.021 frames/sec

Model options

Article numberDescription / second

CP70-16-M-148

Monochrom Camera

CP70-16-C-148

Color-Camera

Specifications

Component / featureValue

Sensor type

LUX160, Global Shutter

Resolution

4,672 x 3,416 Pixel

Frame rate at full resolution

20 .. 148 frames/sec

Exposure time

4 µs .. 1/frame rate

Active area / Diagonal

18.221 mm x 13.322 mm / 22.572 mm

Pixel pitch

3.9 µm x 3.9 µm

A/D conversion

8 Bit

Sensor sensitivity

5 V/lux·s @ 550 nm

Synchronisation

intern, extern, CoaXPress

Synchronisation signals

SynchIN, SynchOUT, TTL level, electrically isolated

Interface

CoaXPress 1.1 (4 ch., CXP-6)
DIN 1.0/2.3 connector

Power

<10 W, PoCXP, extern

Ambiente temperature in operation

0 .. +40°C / 32 .. 104°F

EMVA1288 v.3.1 measurements

(typ., preliminary)

Dynamic range

55 dB

Saturation capacity

7.800 e-

Temporal dark noise

10 e-

System gain

34 e-/DN

Signal-to-Noise ratio

39 dB

Dark-Signal-Non-Uniformity (DSNU)

135 e-

Photo-Response-Non-Uniformity (PRNU)

2%

Non-linearit error (LEmin, LEmax)

1%

F-Mount lens adapter

CP-FM
 

C-Mount lens adapter

CP-CM
 

G-Mount lens adapter

CP-FMG
 

M42x1 lens adapter

CP-M42
 

M42x0.75 lens adapter

CP-T2
 

Power supply CP70, CP90
Power supply CP80

CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series
 

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series
 

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series