CP80-4-*-500 / CP90-4-*-500
3D View
Standards
The CP80-4-*-500 and CP90-4-*-500 cameras are equipped with a 4 megapixel AM41 monochrome or colour image sensor from Alexima. Its outstanding feature, in addition to the high image rate in global shutter mode, is the linear speed increase in the Y orientation, which makes the sensor particularly well suited to light section tasks. The sensor image is homogeneous and has an extremely low pixel error count of less than 4 over the entire sensor surface. The A/D converter depth is 8 bit. The CP80-4-*-500 and CP90-4-*-500 cameras of the CamPerform-CP series are specified to EMVA1288 and tested for consistent image quality.
More product information
Performance
| Resolution (H x V) | Frames / second |
|---|---|
2,304 x 1,720 |
506 |
1,920 x 1,080 |
804 |
1,280 x 720 |
1,204 |
512 x 512 |
1,687 |
2,304 x 32 |
23,004 |
2,304 x 4 |
87,417 |
Model options
| Article number | Description / second |
|---|---|
CP80-4-M-500 |
monochrom camera, BNC connector |
CP80-4-C-500 |
color camera, BNC connector |
CP90-4-M-500 |
monochrom camera, DIN 1.0/2.3 connector |
CP80-4-C-500 |
color camera, DIN 1.0/2.3 connector |
Specifications
| Component / feature | Value |
|---|---|
Sensor model |
Alexima AM41 |
Resolution max. |
2,304 (H) x 1,720 (V) |
Framerate full resolution |
500 fps |
CXP Connector |
BNC (CP80-4-*-500) |
Exposure Time |
2 µs - 1/Framerate |
Active Area |
16.13 x 12.04 mm square |
Pixel Size |
7 µm x 7 µm |
A/D converter |
8 bit |
SNR (EMVA 1288) |
42 dB |
Dynamic range |
48 dB (EMVA 1288) |
Sensitivity |
9 V/lux.s |
Trigger modes |
internal free-run, external, CXP |
External trigger |
TTL signal, 3.3-5V, 10 mA, optically isolated |
Lens mount |
F-mount, C-mount, M42-mount, custom - all exchangeable |
Power |
Power over CoaXPress or extern 24 VDC / 12 W |
Dimensions (without mount) |
85 mm x 85 mm |
Conformity |
CE, RoHS, GenICam |
Scope of delivery |
Camera, Brief Introduction |
F-Mount lens adapter
CP-FM
C-Mount lens adapter
CP-CM
G-Mount lens adapter
CP-FMG
M42x1 lens adapter
CP-M42
M42x0.75 lens adapter
CP-T2
Power supply CP70, CP90
Power supply CP80
CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series
Pigtail cable CP70, CP90
Pigtail cable CP80
for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series
Programming cable CP70, CP90
Programming cable CP80
to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series