CP70-12-M/C-188

3D View

Standards


The CP70-12-M/C-188 camera is equipped with a 12 megapixel CMV12000 monochrome or colour AMS image sensor (CMOSIS). In addition to the high image rate in global shutter mode, its outstanding features are the high image quality and the low thermally-conditioned dark current, resulting in an extremely homogeneous dark and bright image over the entire sensor surface. An expanded high dynamic range (HDR) can be set for large differences in brightness. The A/D converter depth is optionally 8 bit or 10 bit. The CP70-12-M/C-188 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.


More product information

Performance

Resolution (H x V)Frames / second

4,080 x 3,072

188 fps

4,080 x 2,000

255 fps

1,920 x 1,080

465 fps

1,280 x 720

689 fps

4,080 x 32

8,096 fps

Model options

Article numberDescription / second

CP70-12-M-188

monochrome camera

CP70-12-C-188

color camera

Specifications

Component / featureValue

Sensor model

AMS CMV12000

Sensor resolution

4,080 x 3,072

Framerate full resolution

188 fps

CXP connector

DIN 1.0/2.3

Exposure time

28 µs - 1/Framerate

Active area

22.44 mm x 16.90 mm

Pixel size

5.5 µm x 5.5 µm

A/D converstion

10 bit, 8 bit

Dynamic

60 dB

Sensitivity

4.64 V/lux*s @ 525 nm

SNR

40.9 dB

Trigger modes

internal free-run, external, CXP

External trigger

TTL, 3.3-5V, 10mA, optically isolated

Power

PoCXP (8.5 Watt)

Lens mount

F-Mount, C-Mount, M42 and custom

Dimensions

85 mm x 85 mm x 49 mm

Scope of delivery

Camera, brief introduction

F-Mount lens adapter

CP-FM
 

C-Mount lens adapter

CP-CM
 

G-Mount lens adapter

CP-FMG
 

M42x1 lens adapter

CP-M42
 

M42x0.75 lens adapter

CP-T2
 

Power supply CP70, CP90
Power supply CP80

CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series
 

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series
 

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series