CamPerform | CP80-4-M/C-500

3D View


The CP80-4-M/C-500 camera is equipped with a 4 megapixel AM41 monochrome or colour Alexima image sensor. Its outstanding feature, in addition to the high image rate in global shutter mode, is the linear speed increase in the Y orientation, which makes the sensor particularly well suited to light section tasks. The sensor image is homogeneous and has an extremely low error tolerance (typically <4 pixels over the entire sensor surface). The A/D converter depth is 8 bit. The CP80-4-M/C-500 cameras are specified to EMVA1288 and tested for consistent image quality.

More product information

Works with standard lenses

Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.

  • C-Mount
    For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
  • F-Mount/FMG-Mount
    With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
  • M42x1 Mount
    Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.

Maximum standardization

Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:

  • GenICam
    Compatible interface for easy programming
  • EMVA 1288
    Simple comparability via tested, characteristic camera features
  • Shockproof
    Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
  • CoaXPress
    High-performance data transfer using DIN 1.0/2.3 connections


Resolution (H x V) Frames / second

2304 x 1720


1920 x 1080


Model options

Article number Description / second


monochrom camera


Color camera


Component / feature Value

CXP channel speed

6,25 Gbit/s

CXP connector


Resolution max.

2.304 (H) x 1.720 (V)

Framerate with full resolution

500 fps

Framerate with reduced resolutions

10.000 fps @ 2.304 x 80
23.000 fps @ 2.304 x 32

Image sensor

Global shutter CMOS

Sensor model

Alexima AM41

Exposure time (min.)

2 µs

Active area

16.13 x 12.04 mm square

Pixel size

7 µm square

A/D converter

8 bit

SNR (EMVA 1288)

42 dB

Dynamic range

48 dB (EMVA 1288)


9 V/lux.s

Trigger modes

internal free-run, external, CXP

External trigger

TTL signal, 3.3-5V, 10 mA, optically isolated

Software trigger

programmable exposure (timed or width)

Lens mount

F-mount, C-mount, M42-mount, custom - all exchangeable


Power over CoaXPress, 24 VDC / 12 W


0°C ... +40°C ambient


<80 % relative, non-condensed

Weight (without mount)

500 g

Dimensions (without mount)

85 mm x 85 mm x 65 mm


CE, RoHS, GenICam

Scope of delivery

Camera, manual, synchronisation cable

Special features

Skipping mode
Dual high-speed

F-Mount lens adapter


C-Mount lens adapter


G-Mount lens adapter


M42x1 lens adapter


M42x0.75 lens adapter


Power supply CP70, CP90
Power supply CP80

CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series